DN 65-125
Materials
| Body | DN 65-400: Steel, P235GH (1.0345) |
| Ball | DN 65-400: Stainless steel, X5CrNi18-10 (1.4301) |
| Ball seal | DN 65-400: PTFE+C |
| Stem | DN 65-80: Stainless steel, X8CrNiS18-9 (1.4305) DN 100: Stainless steel, X17CrNi16-2 (1.4057) DN 200-400: Stainless steel, X8CrNiS18-9 (1.4305) |
| Stem seal | DN 65-400: FPM |
Mounting
| welding / welding, GOST |
Operation
| DN 65-200 | zinc-plated steel handle |
| DN 250-400 | available with manual gear or with an electric or hydraulic actuator |
Operating conditions
| Temperature | -20 °C - +200 °C |
| Leakage rate | A (EN 12266-1) |
Below -20 °C contact manufacturer. Lowest allowed ambient temperature -40 °C.
DN 65-400
water area
Steam area (not allowed)
short-term working area
Dimensions
DN 65-400
DN 65-125
DN 150-300
DN 350-400
| DN | PN | Product no. | A | D | D1 | D2 | H | H1 | L | S | Kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 65 | 25 | 150065/GS | 278.0 | 65.0 | 76.1 | 121.0 | 169 | 74.0 | 300 | 3.2 | 6.7 |
| 80 | 25 | 150080/GS | 279.0 | 80.0 | 89.0 | 146.0 | 218 | 114.0 | 325 | 3.6 | 10.5 |
| 100 | 25 | 150100/GS | 400.0 | 100.0 | 108.0 | 177,8 | 253 | 117.0 | 325 | 4.0 | 18.1 |
| 200 | 25 | 150200/GS | 1200.0 | 200.0 | 219.0 | 355.6 | 343 | 135.0 | 400 | 6.0 | 60.0 |
| 250 | 25 | 150250/GS | 250.0 | 273.0 | 419.0 | 148.0 | 530 | 6.0 | 88.0 | ||
| 300 | 25 | 150300/GS | 290.0 | 325.0 | 508.0 | 206.0 | 686 | 7.0 | 177.0 | ||
| 350 | 25 | 150350/GS | 340.0 | 377.0 | 610.0 | 267.0 | 762 | 7.0 | 258.0 | ||
| 400 | 25 | 150400/GS | 390.0 | 426.0 | 660.0 | 300.0 | 914 | 7.0 | 547.0 |
Product number conversions
| Product no. | Old Naval No |
|---|---|
| 150065/GS | |
| 150080/GS | |
| 150100/GS | |
| 150200/GS | 234456/GS |
| 150250/GS | 23443705/GS |
| 150300/GS | 23447805/GS |
| 150350/GS | 23449605/GS |
| 150400/GS | 23447905/GS |
