Air Handling Unit
with PICV direct control
Applications
Built around typical heating and cooling applications, this guide shows how Frese valves and controls can be used in different system layouts. Practical schematics, explanations of valve functions and key design considerations help you identify suitable solutions for your project.
Air Handling Unit
with PICV injection circuit
Calorifier
with PICV control
Chilled Beams
with PICV control
Chilled Ceilings
with PICV control
Circulation of Minimum Flow
Plant Room, with PICVs and flow limiters
Circulation of Minimum Flow - System End
with PICVs and flow limiters
Condensing Boiler - Plant room
with PICV control
Fan Coil Unit Application
with PICV control
Fixed Speed Chiller - Plant Room
with PICV control
Variable Speed Chiller - Plant Room
with PICV control
Heat Pump - Plant Room
with PICV control
Hot Water Tank
with PICV control
Hot Water Tank
With PICV control & Self Acting Thermostat
Plate Heat Exchanger
with PICV control
Dynamic Radiator System
2-pipe DP above 70 kPa with DPCV
Dynamic Radiator System
2-pipe DP below 70 kPa
Static Radiator System
with DPCV and dynamic balancing
Static Radiator System
with dynamic balancing
Stand-alone Terminal Unit
with PICV control and Self Acting Thermostat
Stand-alone Terminal Unit
with PICV control
Trench Heater
with PICV control
Underfloor Speed Chiller
with PICV control - single circuit
Radiant panles
4-pipe heating and cooling